Glitter Heart Rings and Knobs
by Mark Montano Follow

Make resin rings and drawer knobs with silicone molds and basic hardware supplies.  Watch the video tutorial here:


  • You'll need

    Famowood Glaze Coat

    Screws and nuts

    Adjustable hose clamps

    Buttons, glitter, beads and Confetti

    Craft knife


    Plastic cups

    Silicone mold

    7 years ago
  • Cut your cardboard in squares
    Cut out section of the cardboard so you can slip on the hose clamp just under the screw
    *Make sure it's secure
    Cut small holes in the center of the cardboard squares for the screws

    7 years ago
  • Mix equal parts of the Glaze Coat for 5 minutes
    Pour 1/4" in each mold 

    7 years ago
  • Fill with your glitter, buttons and confetti
    Pour the Glaze Coat almost to the top of the mold, but not quite
    If you notice bubbles, blow on top of the filled hearts until they pop
    Carefully position the head of the screw inside a Glaze Coat filled heart
    Position the screw part of the hose clamp inside the heart
    Make sure the cardboard does not touch the Glaze Coat
    Let dry overnight OUTSIDE under a cardboard box or in part of the house you're not occupying

    7 years ago

Discussion 0


Welcome to Kollabora

Get the best DIY projects, patterns, and inspiration straight to your inbox!